Modular Clean Rooms

Afromt HVAC System’s Modular cleanroom interface with floors, ceilings, and mechanical components to supply an ultra-clean environment with effective management of temperature, pressure, Airflow, Humidity, and Air filtration.

They can be customized to match specific requirements and supply an economical alternative to standard construction without compromising quality, durability, or efficiency. Modular Clean Rooms also utilize a versatile design that permits fast and straightforward installation during a system that will be expanded or relocated as need be.

Advantages of Afromt HVAC System Modular Clean Rooms:

• Full compatibility chemically used for cleaning and sanitizing
• Easy Modular Cleanroom installation
• State-of-the-art white room technology
• Flush surfaces everywhere
• Scratch-resistant materials
• Easy to switch during the wall installation
• Modular Cleanroom suitable for ISO 5 (class 100) to ISO 8 (Class 100,000)

Wall Partition System [Progressive / Non-Progressive Type]

Afromt HVAC System’s modular wall panels are manufactured from Double Skin Panels of PCGI (Pre-coated or Powder Coated Gl) with inner & outer skin of 0.5 to 0.8 mm as standard thickness. The Modular panels made of 1200mm, 1000mm & 900mm as standard width. Panel thickness varies from 50mm / 60mm / 80mm / 100mm/125 with provision for PVC conduits pipes for electrical cables. Panels of 50mm/80mm/100mm/ 125mm are designed to hold return Air Ducts / inbuilt Risers. Panel height is often adjusted to 3000mm with provision for stack-able panels.

Modular Ceiling Panels

Afromt HVAC System’s modular ceiling panels are made from 50mm / 60mm thickness depending upon the sort of application. Ceiling panels are mounted with specially designed suspension members and linkages for each application. Walk-able & Non-Walk-able ceiling panels are made as per the client’s requirement with specially designed stiffening ceiling panels for walk-able load-bearing ceilings.

Clean Room Finishes

Afromt HVAC System provides premium hygienic flooring solutions that are vital for achieving the top-quality production process and to face up to the severe cleaning regiments typical in pharmaceutical manufacturing.

• Epoxy Flooring
• PU Flooring
• PVC Vinyl Flooring

Covings

All the interior & external corners of modular paneling systems are coved with PVC covings/ aluminum covings having special Male & Female profiles with locking system and are fixed from floor to wall panel, ceiling panel to wall panel, and filled the silicone sealant properly.

Modular Clean Room Doors

Afromt HVAC System’s Modular Cleanroom doors are manufactured from galvanized/stainless steel sheets with lock formed edges. Insulated and bonded with poly-foam, honeycomb paper, or rock wool forming a rigid flush fitting with innovative flush double glazed finished in pure polyester powder coating of 60-80 microns forming a smooth surface finish.

Standard Door Specifications:

Type – Single/Double Leaf

Leaf Thickness – 44 mm (or as per specific requirement)

Leaf & Frame – Galvanized Steel, Stainless Steel

Material

Door Leaf – 44 mm thick, Shutter standard sheet thickness 0.6 mm to 0.8 mm thick or as per specific requirement.

Door Frame – Extruded Aluminium powder coated profile frame/ GI powder coated frame/ SS 304 frame.

Infill – PUF/Rockwool/Honeycomb

Reinforcements – At hinges, door closer and lock case fitments

Finish – Doors are coated with either pure polyester or epoxy polyester powder achieving a coating thickness of 60-80 microns. (Powder coating available in standard RAL colours)

Glazing – 5-6 mm thick toughened glass/float glass

Ironmongery – SS Ball Bearing hinges, Latch Lock, Dead Lock, Door Closer, D Handle, Push Plates, Kick Plates, Automatic Bottom Drop Seal, Panic Bar for emergency doors, etc

Door opening – Left or right as needed
Construction can be tailored to meet specific requirements.